Audio Mixing Platform (AMP)   Audio Mixing Platform (AMP)

Contact us info@audiomixingplatform.com

FORUMS

Author Topic: xctrl not working and config weird  (Read 220 times)

mattseymour

  • Full Member
  • ***
  • Posts: 202
    • View Profile
xctrl not working and config weird
« on: June 10, 2018, 03:15:16 PM »
Brought my Xtouch back from the storage and I can't get it to work with the new gui. Just sits there. Also the gui doesn't seem to be creating a config file, unless that's changed name and location.

So something isn't right with this on my system. Any ideas where I can start looking?
« Last Edit: June 10, 2018, 07:34:46 PM by mattseymour »

mattseymour

  • Full Member
  • ***
  • Posts: 202
    • View Profile
Re: xctrl not working and config weird
« Reply #1 on: June 10, 2018, 04:01:45 PM »
A bit more digging and I found the config is now stored in c:\users\<username>\appdata\roaming\ampgui

Deleted that, but no joy with the xtouch. The gui is not saving the midi template file correctly. It populates the file with mcu.xml no matter what is selected when the config is saved.

I can delete the config file, setup the gui correctly for my xtouch and this is what gets written to the config.

midisetup1\sbChannelNo=1
midisetup1\cmbControllerType=1
midisetup1\cbEnable=true
midisetup1\cmbWdlWindows=0
midisetup1\cmbInputport=1
midisetup1\cmbOutputport=2
midisetup1\mIpAddressLinedEdit=192.168.2.8
midisetup1\leTmpltPath=midi-commands/MCU.xml

« Last Edit: June 10, 2018, 07:35:00 PM by mattseymour »

mattseymour

  • Full Member
  • ***
  • Posts: 202
    • View Profile
Re: xctrl not working and config weird
« Reply #2 on: June 10, 2018, 04:06:27 PM »
If I edit the config file to have the correct midi template file that's what gets loaded in next time, but it still doesn't work unfortunately
« Last Edit: June 10, 2018, 07:35:37 PM by mattseymour »

admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 950
    • View Profile
Re: xctrl not working and config weird
« Reply #3 on: June 12, 2018, 04:06:02 AM »
Working on this now... Will post some details as soon as it is worked out.

Bob